PSROSE

psrose − Plot (length, azimuth) as windrose diagram or polar histogram (sector or rose diagram).

psrose file [ −Asector_width[r] ] [ −Btickinfo ] [ −C[mode-file] ] [ −Eazimuth/elevation ] [ −Gfill ] [ −H[nrec] ] [ −I ] [ −K ] [ −M[parameters ] [ −O ] [ −P ] [ −Rr0/r1/az_0/az_1 ] [ −Sradial_scale[n] ] [ −T ] [ −U[/dx/dy/][label] ] [ −V ] [ −Wpen ] [ −Xx-shift ] [ −Yy-shift ] [ −Zscale ] [ −ccopies ] [ −: ] [ −bi[s][n] ]

psrose reads (length,azimuth) pairs from file [or standard input] and generates PostScript code that will plot a windrose diagram. Optionally (with −A), polar histograms may be drawn (sector diagram or rose diagram). Options include full circle and half circle plots. The PostScript code is written to standard output.

file

Name of ASCII [or binary, see −b] data file. If no file is given, psrose will read standard input.

No space between the option flag and the associated arguments.

−A

Gives the sector width in degrees for sector and rose diagram. [Default 0 means windrose diagram]. Append r to draw rose diagram instead of sector diagram.

−B

Sets map boundary annotation and tickmark intervals; see the psbasemap man page for all the details. Remember that "x" here is radial distance and "y" is azimuth. The ylabel may be used to plot a figure caption.

−C

Plot vectors showing the principal directions given in the modes file. If no file is given, compute and plot mean direction.

−E

Sets the viewpoint’s azimuth and elevation [180/90]

−G

Selects shade or color for sector infill [Default is no fill]. Specify the grey shade (0−255) or color (r/g/b, each in range 0−255; h-s-v, ranges 0−360, 0−1, 0−1; or c/m/y/k, each in range 0−100%; or valid color name).

−H

Input file(s) has Header record(s). Number of header records can be changed by editing your .gmtdefaults4 file. If used, GMT default is 1 header record. Use −Hi if only input data should have header records [Default will write out header records if the input data have them].

−I

Inquire. Computes statistics needed to specify useful −R. No plot is generated.

−K

More PostScript code will be appended later [Default terminates the plot system].

−M

Specify new arrow attributes tailwidth/headlength/headwidth/r/g/b to change the appearance of arrows (Only if −C is set). [Default is 0.075c/0.3c/0.25c/0/0/0 (or 0.03i/0.12i/0.1i/0/0/0)].

−O

Selects Overlay plot mode [Default initializes a new plot system].

−P

Selects Portrait plotting mode [GMT Default is Landscape, see gmtdefaults to change this].

−R

Specifies the ’region’ of interest in (r,azimuth) space. r0 is 0, r1 is max length in units. For azimuth, specify -90/90 for half circle plot or 0/360 for full circle.

−S

Specifies radius of circle. Append n to normalize input radii to go from 0 to 1.

−T

Specifies that the input data is orientation data (has a 180 degree ambiguity) instead of true 0-360 degree directions [Default].

−U

Draw Unix System time stamp on plot. User may specify where the lower left corner of the stamp should fall on the page relative to lower left corner of plot. Optionally, append a label, or c (which will plot the command string.). The GMT parameters UNIX_TIME and UNIX_TIME_POS can affect the appearance; see the gmtdefaults man page for details.

−V

Selects verbose mode, which will send progress reports to stderr [Default runs "silently"].

−W

Set pen attributes for sector outline or rose plot. [Default is no outline]. pen is a comma delimetered list of width, color and texture, each of which is optional. width can be indicated as a measure (points, centimeters, inches) or as faint, thin[er|est], thick[er|est], fat[er|est], or obese. color specifies a grey shade (0−255) or color (r/g/b, each in range 0−255; h-s-v, ranges 0−360, 0−1, 0−1; or c/m/y/k, each in range 0−100%; or valid color name). texture is a combination of dashes ‘-’ and dots ‘.’.

−X −Y

Shift origin of plot by (x-shift,y-shift). Prepend a for absolute coordinates; the default (r) will reset plot origin. Give c to center plot using current page size.

−Z

Multiply the data radii by scale. E.g., use −Z0.001 to convert your data from m to km [Default is no scaling].

−c

Specifies the number of plot copies. [Default is 1].

−:

Input file has (azimuth,radius) pairs rather than the expected (radius,azimuth).

−bi

Selects binary input. Append s for single precision [Default is double]. Uppercase S (or D) will force byte-swapping. Append n for the number of columns in the binary file(s). [Default is 2 input columns].

To plot a half circle rose diagram of the data in the file fault_segments.az_r (containing pairs of (azimuth, length in meters), using a 10 degree bin sector width, on a circle of radius = 3 inch, grid going out to radius = 150 km in steps of 25 km with a 30 degree sector interval, radial direction annotated every 50 km, using a light blue shading (200/240/255) outlined by a solid red pen (width = 0.75 points), draw the mean azimuth, and shown in Portrait orientation, use:

psrose fault_segments.az_r −R0/150/-90/90 −B50g25:"Fault length":/g30:."Rose diagram": −S3i −A10r −G200/240/255 −W0.75p/255/0/0 −Z0.001 −C −P −T −: | lpr

To plot a full circle wind rose diagram of the data in the file lines.r_az, on a circle of radius = 5 cm, grid going out to radius = 500 units in steps of 100 with a 45 degree sector interval, using a solid pen (width = 0.5 point), and shown in landscape [Default] orientation with UNIX timestamp and command line plotted, use:

psrose lines.az_r −R0/500/0/360 −S5c −Bg100/g45:."Windrose diagram": −W0.5p −Uc | lpr

No default radial scale and grid settings for polar histograms. User must run psrose −I to find max length in binned data set.

GMT(l), gmtdefaults(l), pshistogram(l)